8" drum sander with an expandable drum. Removable handle and dust shoot makes for easy transportation. Drum lowering handle keeps the unit on a steady three point stance and delivers smooth cutting to the floor. This sander can be hooked into a tank vacuum
The Evolution is a LGR units designed for homeowner and commercial use. It removes over 75 pints a day and is also great for drying, drywall, painting concrete and overall construction drying
The Kushlan Products 350 Mixer Fully Assembled is filled with features that makes this rugged mixer affordable yet ideal for the do-it-yourselfer or professional. Electric-driven, 21 RPM mixers can swivel 360° and can be discharged in any direction. Supported by a durable steel frame, the drums are adjustable to the correct angle for a variety of mixes. The 5/16" thick polyethylene drums are resistant to dents, cracks, and rust yet easy to clean. Easy breakdown for transport or storage, the 3.5 cu. ft. drum holds 2 bags of premix concrete
Provides thermal protection and an improved thermal barrier reducing piston ring wear
Built to meet the operational and flexibility demands of the general construction market. With 5hp from a 76cc engine, the dependable 695GC is the perfect saw for the smaller openings
Using four-pad, random orbit technology, the U-Sand Pro sander makes floor sanding easy and worry-free
Electric Wallcovering Steamer for easy removal of wall coverings
Versatile reversible plates ideal for compaction of interlocking paving stones, trenches, landscaping and maintenance. The only plates with a durable, integrated wheel set that provides for maximum built-in mobility. Single lever direction control provides for easy operation
Designed and built with the most advanced technology, these walk behind trowels offer high quality concrete finishing plus added gyroscopic safety sensor and patent-pending engine speed limiter provide tripple protection for the operator. This unique system minimizes a runaway handles situation
Diamond 14x.125x1-20mm Premium High Speed Wet/Dry General Purpose Concrete
2" electric dewatering pump with auto float. Automatic version of our model LB-480. Relay sensor activates pump when water comes in contact with the electrodes. When water falls below the sensor's electrodes the pump runs for one minute then shuts off automatically
RentSpray 500 skid (labeled 440 Impact) paint sprayer
Compact, lightweight and engineered for maneuverability and reliability, the MK-CX-3 (Honda) can be used for wet or dry cutting. A corrosion resistant, cast-aluminum blade guard that mounts on either left- or right-hand side of saw enables cuts within 1" of wall or curb. Built-in water distribution system supplies water to both sides of blade. The CX-3 features a Poly V-belt for positive power transmission with a sturdy single piece steel motor mount weldment and a 1" diameter blade shaft with self aligning bearings to minimize vibration. The hinged blade guard provides easy access for blade changes and inspection and a folding handle bar for compact transport
The MK-BX-4 uses a patent pending misting system to control dust generated during cutting. The ergonomically designed, easy to grip nylon handle with built-in lockable trigger switchhandle allows for easy operation and control for either left or right handed cutting. Unique features include a removable plastic tray and a locking table with an adjustable depth stop to prevent cutting through the table. Portable and lightweight, the BX-4 encorporates an Open-back design that allows for material up to 16" long and 5" deep to be cut and the plastic dust collection pan with replaceable dust filter make on site dust control a snap
The MK-101 Pro24 features a fully enclosed high torque, fan-cooled, micro V-belt drive motor with permanently lubricated, dual-sealed, heavy-duty blade shaft bearings. A multi-position motor post and cutting head enable convenient cutting of various tile sizes and the built-in water distribution system supplies water to both sides of blade. The 101 Pro24 encorporates a variable height cutting head that allows for plunge cuts and use of blades smaller than 10" in diameter. The rugged Cast aluminum blade guard and motor post with a one-piece reinforced zinc-plated steel frame accommodates 6" and 8" profile wheels. A simple blade shaft lock makes for easy blade removal and the linear-bearing and chrome plated guide-bar assembly ensure precise cutting of tile up to 24" in length and 14" on the diagonal. Made in the USA with a One-year limited warranty
The MK-370EXP features a Powerful high-torque motor with a maintenance-free, self-lubricating pinion and gear-box assembly. The tilting head allows for precise 45º miter cuts and a Variable height cutting feature allows for plunge cutting up to 2". The 370EXP has a sliding aluminum die-cast cutting table that rips 18" tile and 13" on the diagonal. The 3/4" diameter chrome-plated linear guide-bar system and single piece zinc-plated steel frame provide rigidity, strength and durability. A simple, hinged blade guard enables easy blade changes and the removable thermoplastic water reservoir makes for easy cleaning and maintenance of the saw. This item comes with a heavy duty on/off switch, built-in water pump receptacle, and 7" diamond blade & submersible water pump included. One-year limited warranty
13 Gal 1.3HP 110V Wet/Dry Vacuum, 2 Stage Blower Motor For Longer Life, Self Cooling Motor Design
